Monthly Archives: July 2016

Five Solutions to Low Water Pressure

Are you bothered by a low water pressure problem? This issue can be frustrating and make minor tasks like washing dishes and clothes, showering, or watering plants take longer than necessary. It can also increase the amount of water you are using, which in turn increases your water bill.

A good way to tell if you may have a problem is your toilet cistern, which generally holds about 7.5 liters of water and should take no more than 1 minute and 40 seconds to refill. If you hear your toilet filling for longer, it could be a signal of a pressure issue. You can test water pressure on your own with a kit; normal pressure is around 50 PSI (pounds per square inch), so if your results show it’s below 30, you’ve confirmed a problem.

A few measures you can take to identify the origin of your problem and possibly increase water pressure include:

  • Defective valves – Locate your main water valve and make sure it is all the way open. It can unexpectedly slip without any sign or indication, and if the valve is turned off or even closed slightly, your water pressure can be dramatically impacted. If your pressure is low, this is a good place to check first!
  • Check elevation – If your house is located higher than the water storage tank, pressure will be difficult to maintain. If possible, have your tank elevated higher than your house to ensure the best water pressure possible.
  • Check for water leaks – Damaged pipes allow water to seep out, much like a straw with a hole in it; visually inspect water pipes for cracks, leaks, or debris buildup. If you are unable to find any leaks, turn off your main water valve to your home or structure and immediately check the water meter reading. After waiting a couple of hours, check the meter again and if the number increases, that’s a sign you have a leak.

 

  • Check pressure regulator – Locate the pressure regulator below the hose connection attached to your home. When a pressure regulator isn’t working properly, you will notice low water pressure at every faucet in your home. This kind of plumbing repair is best left to a professional.
  • Mineral deposit buildup – Over time, mineral deposits can gather and clog water pipes, blocking faucets and showerheads and restricting the flow of water. To remove mineral deposit buildup, try scrubbing the affected areas with a toothbrush using a commercial cleaner or a simple solution of white vinegar or lemon and baking soda. If that doesn’t do the trick, you may need to hire an expert.

Sometimes your city’s pressure may just not be what you hoped. The best solution here is opting for a pressure tank and pump. The pressure tank, incorporated into your plumbing after the main shutoff valve, will keep the volume of water in your system high and maintain pressure at a more stable level. To boost the pressure beyond that, you would need a pump to go with the tank, which takes the low-pressure water coming into your home and increases the PSI before sending it through the pressure tank. The right pump depends on a number of factors, and if you would like to discuss your options we would be happy to help.

More than likely, to fix your water pressure a professional plumber will be needed. However, identifying and sourcing low water pressure causes yourself may help isolate the problem so you can more easily describe symptoms to an expert. If you have low water pressure in your home, we can help you diagnose the problem and give you all of your available options to solve the issue. Contact us today to enjoy better water pressure in no time.